• Buzzweld Community Forums

    Titan Offroad Racing

    Titan Offroad Racing
    By Titan Offroad Racing,
    Titan driven by myself (Lee Craighead) has the privilege of having a full coatings sponsorship from Buzzweld, these include , chassis in one, 2K, WAR, corrosion inhibitors, waterproof grease are some of the products we have the pleasure of using on Titan. With over 20 years of off-roading under my belt as you can imagine over the years I have tried hundreds of products to protect the trucks, however none have ever come close to the level of protection that the Buzzweld products offer, the space frame receives a tremendous amount of direct impact and abrasions from trees and rocks etc but the coating remains around 96% intact, making touching up between events quick and simple, to the point it is extremely hard to see any patch repair as the products are so consistent. Craig and Rachel are amazing people, nothing is too much trouble and their wealth of knowledge is phenomenal, I hear you ask yourself would I recommend Buzzweld products?? Absolutely I won't use anything else either on the race trucks or on our heavy plant equipment. Give it a go and you'll soon understand why we use it. We also have the privilege of supporting Buzzweld with data and feedback to aid their R&D testing its capabilities in the most brutal environments. Well done Buzzweld 👍 Check us out on Facebook 😊

    W.A.R. underbody stonechip, sealer schultz & Cavity wax

    Craig Jones
    By Craig Jones,
     W.A.R. Wheel Arch Refinement Full Product Guide Available in 400ML Aerosols and 2500ML tIns. W.A.R. is our most versatile product, being suitable for both external and internal use, as well as being tough, flexible, tintable so we can colour it to your spec, direct to rust, and metals. There is very little you cannot do with W.A.R. Double up the protection on ferous metals by using RCP primer.

    Aloha From Big Island HI

    By abosely,
    Aloha everyone, I'm on the Big Island Hawaii. Building a 72' Series III SWB, LHD and and building a new SIIA bulkhead. Dave from Westlakes All Wheel Drive is putting a bulkhead 'kit' for me, building a new chassis from 3.5mm material and Richards Chassis outriggers and cross members 2 & 3, building cross members 1, 4 & 5. Rear cross member is being built out of .188 material. Using modified Land Cruiser FJ60 axles and diffs, 300Tdi moved forward 102mm, Stubby R380, Ashcroft adapter kit to mate series TC to the gearbox.  Going to be using all the Buzz Weld products with the best combinations that Craig suggests. This should be fun! :-) Putting the Buzz Weld stuff on the pallet with the 300Tdi & gearbox to get it all here to me. Cheers, Allen

Portal by DevFuse · Based on IP.Board Portal by IPS
  • Member Statistics

    Total Members
    Most Online
    Simon Jackson
    Newest Member
    Simon Jackson
  • Buzzweld W.A.R

  • Buzzweld CIO